How to Safely Change a Flat Tire on Utah's Highways

Flat tires can be a real hassle, especially when you're cruising down one of Utah's beautiful highways. Whether you're headed to the stunning landscapes of Zion National Park or just commuting through Salt Lake City, knowing how to safely change a flat tire can save you time and stress. At Utah Towing Guys, we want to ensure that you’re well-prepared for any roadside mishap. So, here’s a handy guide on how to safely change a flat tire.
Assess the Situation
First things first, when you realize you have a flat tire, remain calm and find a safe spot to pull over. Look for a level area away from traffic, ideally a parking lot or an emergency lane. It’s essential to avoid stopping on the highway itself if possible, as this could put you and others at risk. Turn on your hazard lights to alert other drivers that you’re having trouble.
Gather Your Tools
To change a tire, you’ll need a few essential tools: a spare tire, a jack, a lug wrench, and possibly a tire iron for added leverage. Many vehicles come equipped with these tools, but it's a good idea to double-check. If you don’t have a spare tire, or if you’re unsure how to proceed, don’t hesitate to reach out to Utah Towing Guys for assistance!
Loosen the Lug Nuts
Once you’ve ensured you’re in a safe location, it’s time to get to work. First, use the lug wrench to loosen the lug nuts on the flat tire. Turn them counterclockwise, but don’t remove them just yet. It’s usually easier to loosen them while the tire is still on the ground, as it prevents the wheel from spinning.
Jack Up the Vehicle
Next, you’ll want to position the jack under your vehicle. Consult your owner’s manual for the proper placement, usually found near the wheel wells. Once secured, pump the jack until the tire is off the ground. This is where you’ll want to be extra careful; ensure your vehicle isn’t wobbling while you’re working. Safety is key!
Remove the Flat Tire
Now that the vehicle is lifted, it’s time to completely remove the lug nuts. Take them off, placing them somewhere safe so they don’t roll away. After that, carefully remove the flat tire and set it aside. It’s always a good idea to check the wheel hub for any debris or damage while you’re at it.
Install the Spare Tire
Next, grab your spare tire and align it with the wheel hub. Push it onto the hub until it’s snug. Then, hand-tighten the lug nuts onto the bolts. Once they’re on, use the lug wrench to tighten them fully, turning them clockwise. It’s best to do this in a criss-cross pattern to ensure even tightening.
Lower the Vehicle and Final Checks
Carefully lower your vehicle using the jack once the spare is securely in place. Once it’s back on the ground, use the lug wrench to give the lug nuts a final tighten. Looseness can result in further issues later on, so take care to do this step thoroughly.
Wrap it Up
Finally, store all your equipment back in your vehicle, including the flat tire. If the tire is repairable, visit a professional; if not, you may need to replace it. If you find any of these steps challenging or uncomfortable, call Utah Towing Guys for help! Our team specializes in roadside assistance and is ready to lend a hand, ensuring you and your vehicle get back on the road safely.
Remember, changing a flat tire is a valuable skill, but there’s no shame in calling for help if you need it. Stay safe, and happy travels on Utah’s scenic highways!


